10 Best Aquarium Wave Maker in 2021 (Reviews & Guide)

Creating a nice environment for the most adorable pets should be a priority for all aquarium owners. To make your fish happy there are certain things that you need in your aquarium. Having the best aquarium wave maker is one of them. 

Advancement in technology has brought tremendous changes in this century. Come to think of it, the creativity behind an aquarium wave maker is great. An aquarium wave maker cannot create the exact environment like that of an ocean. However, it makes your pets feel much comfortable and help them thrive perfectly. Do you want to know more about how to get the best? Well, read on

Best Aquarium Wave Maker Comparison Chart

Product NameSizeWeightDimensionsPrice
Hydor Koralia Evolution Aquarium Circulation Pump1400-1500 GPH1.2 pounds6 x 3 x 3 inches
Hydor Koralia Nano Aquarium Circulation Pump565 GPH9.6 ounces3.5 x 2 x 2 inches
Jebao OW Wave Maker Flow PumpOW-40, 317-3962 GPH2.8 pounds6.8 x 6.9 x 4.3 inches
FREESEA Aquarium Wave Maker Power Head Circulation Pump6W 1056GPH for 20 to 60 gallon tank13 ounces-
Maxspect XF330 Gyre Pump and Controller Package WavemakerFor aquariums from 25 to 100+ gallons5.1 pounds-
Super Aquatic JVP-102A 1300Gph Aquarium Circulation Pump Wave Maker-12.8 ounces6.4 x 4.6 x 4.4 inches
SunSun JVP-110 528-GPH Wavemaker Pumps-1 pounds6 x 2 x 3 inches
Reef Octopus Octo Pulse 4 Aquarium Wave Pump 4500 GPH4500 GPH4 pounds8 x 7 x 7 inches
SUNSUN JVP Series Submersible Circulation Powerhead Pump530GPH, 2-pack1 pounds6 x 4 x 3 inches
Sicce Voyager 3 Power Stream Pump1200gph1.5 pounds7.8 x 4.8 x 4 inches


Best Aquarium Wave Maker Reviews

Finding a quality wave maker can be troublesome especially if you are buying for the first time. Check out these top models we have reviewed below. They will be a great addition in your aquarium.

Speaking of flow, the Hydro Koralia Evolution circulation pump is very effective in the circulation and flow of water in the aquarium. This circulation pump has a compact design to make it last through the years. It comes with magnet suction cups. They are very powerful in that they can firmly hold the powerhead about 15mm of your aquarium glass thickness. 

This circulation pump’s powerhead is very flexible. You can easily adjust up or down or to the sides. You don’t actually require anything else apart from what is packaged in it. It is very easy to start and set up. It provides adequate in the aquarium. It is also designed to easily pair up with wave makers, pumps and timers. Its pumping rate ranges from 750GPH to 850GPH.

What I like

With its improved technology, I didn’t hear any noise coming from the circulation pump. It is very smooth and the circulation flow impressed me. Its extension cord is around 6 feet and is coated so I can keep my hands safe from electric shock. I also loved how it could work with timers. Its intervals vary in hours, minutes and seconds.

My aquarium holds 70 gallons of water and this 750GHP pumping rate has worked well with me. I have used Koralia circulation pumps before and none of them matches the new design. This circulation pump is generally great. It generates a higher pumping rate and easy to use with timers. The magnet and suction cup firmly held the powerhead through the ¾ inch aquarium glass.

What I don’t like

I was once electrocuted. It is sad that this product didn’t come with an electric shock hazard.

The best part about the Hydro Koralia circulation pump is that it is energy efficient. It runs on 110 volts and consumes 4.5 watts while pumping 750 gallons per hour. It is a pretty energy-saving overhead for my aquarium.

  • Compact design
  • Energy saving
  • It is flexible
  • Pair up with pumps and wave makers well
  • Electric shock hazard
  • Leaking voltage

The Hydro Koralia Nano aquarium circulation pump is packed with compactness for long-life. The powerhead is plastic built so there’s no fear of rust. There’s also nothing in the aquarium that could ruin the plastic. His circulation pump is unique in that it is capable of producing a water flow similar to the flow in seas and rivers. 

It comes in three different types, 240 GPH, 425 GPH and 565 GPH. It is designed to accommodate a timer which can be used to control and set various time intervals. It also features a cable protector. The plastic construction makes this circulation pump suitable for both marine and freshwater aquariums. It has featured in it, a function cup and a magnet to hold the powerhead from any position. It runs on a 110 volts power source to generates its flow.

What I like

I’ve had this Nano circulation pump for six years and it is still up to the task. It liked its durability and its simple mounting. It hasn’t changed a bit and I give it a thumbs up. I had a large tank so I ought to place the powerhead at the centre. The magnet function cup made it much simpler. I easily placed the powerhead where I wanted and it was fixed firmly. It is impressive how it consumes less energy. 

To get it running, I required a power of 3.5 watts and an inflow of 110 volts. I used a 425 GPH pumping rate on my 30-gallon long tank. The Nano Aquarium circulation pumps are perfect for small aquarium tanks. Another mind-blowing fact is that the fans are magnet driven. Not under any circumstance will the temperature of the water in the aquarium affect the circulation of water unless it melts the plastic. 

I also loved how this circulation pump could be double featured. Instead of getting a new pump with a higher pumping rate, you could simply get another one of this pump. They work well together since they are the most efficient and are quite cheap.

What I don’t like

It has an inverted circulation. Even though it is not a big mess, it is still exhausting when you realize this after setting it up. You’ll have to undo it and restart it.

  • Cable protection inclusion.
  • Higher flow rates.
  • Energy-saving.
  • Inverted circulation
  • Use for small tanks

Jebao OW wavemaker flow pump is the latest in the OW series. It was put up in 2018 as an update to the SW ME WP series. It comes with a controller that had multiple settings on its various pumping power. There are 5 settings from the lowest “c” mode to the highest “h” mode. It has a night mode accompanied by a sensor. To change the settings, it has a mode button which easily switches the power. 

It also has a lock mode which is necessary when using two pumps at a go. The powerhead has a magnetic base which is easy to install and fix. The powerhead is also very flexible making it easier to rotate to get the suitable wave motion. It uses very low power and voltage. It ceramic build makes it wear-proof hence it is reliable and long-lasting. Its flow rate ranges from 184-2245 GPH. It also features two pumps.

What I like

Its pumps could easily be used together alternatively as master and slave pump. This happens when lock mode is enabled. It is also very easy to control the second pump with the master pump. Another viewpoint is that two pumps could easily be placed together with the presence if rubber coated magnets. It is placed on the back of the two pumps. 

The 5 mode settings are switched with a wireless controller making it easier to change the frequency on the pumps. This wave maker also has an enhanced motor which ensures it remains super quiet. This ensures that there are no irritating noises at your place of installation. The night mode present in this pump makes it interesting. 

It has a light sensor that accompanies it. So, if the lighting is dim enough, the pump will go into the lowest power setting “c”. It makes it much easier to change the direction of wave motion. It is also very durable and I rely on it.

What I don’t like

Its high performance also comes as a vice. If you use this setting for long periods, the lifespan of this pump will reduce.

  • 3D angle rotation
  • Super quiet motor
  • High performance
  • Reduced life as a result of underperformance.

This wavemaker is a double-headed circulation power pump. The powerheads are connected and joined by a very strong magnet. They are about ½ inch on both sides and provide a rigid attachment on the aquarium wall. In order to operate, it should be fully submerged. This will also prevent its shaft from being destroyed. When placing the magnet, don’t stick it. Slide it through the glass to avoid pressing your finger. 

The FreeSea wavemaker is made with ABS plastic making it long-lasting and reliable. The powerheads are easily adjustable so you could easily get your intended direction of flow. The magnet outside the glass is used to rotate the wavemaker in order to adjust the orientation of the powerheads.

What I like

It has an ABS plastic shaft which is wear-resistant. Its motor, made from copper alloy, is corrosion resistant making it long-lasting. The fact that this wavemaker can be used for various purposes interests me. It can be used as a powerhead circulation pump in aquariums, fish tanks and ponds. It can also be used as a merger circulation pump. The FreeSea Aquarium wavemaker can be used in 20-80 gallon long tanks. 

It is designed to make it durable. It consumes very little amount of power. It is rated 8 watts and 110 volts. This wavemaker proves to be outstanding by producing a pumping rate of up to 1600 GPH. I also admire its effectiveness. It can be put on a timer either at night or whenever you feed the fish. This ensures the food doesn’t spread all over the aquarium. 

With its powerful pumping rate, it is capable of moving the trash out of the aquarium’s bottom and boosts water filtration. With this item, all your problems with fish will be solved. This water pump is generally pleasing. It also features an adjustable flow rate with the availability of a flow switch on its outlet. Its powerful water push is also a major aspect. It can facilitate water flow even in 200-gallon fish tanks.

What I don’t like

It facilitates water push only. Generally, this wavemaker doesn’t necessarily work as a circulation pump. Plus, it has a short extension cord.

  • Solid magnet fixation
  • Long-lasting
  • Corrosion resistance
  • Short power cord

The Gyre pump and controller XF330 is a product from Maxspect. It is a 3rd generation of the new 300 series of Gyre pumps and contains various upgrades. It gives up to 2350 GPH and uses 5-35 watts of power. It is ideal for fish tanks carrying 25-109 gallons. It is relatively silent. This is as a result of its wave movements which provides a quiet flow. 

You could also easily add another similar gyre flow pump and operate them all with one controller. The controller maintains the power supply and pump control for both pumps. For app control, you’ll require the wireless IVC6 module. It has 5 more settings for controlling the flow rate (constant speed, gradual pulsing, random, and alternating backwards and forwards and pulsing).

These motions create a unique water flow and motion in the aquarium. It is also accompanied by a timed feed button (10minutes). Its controller functions with all previous editions of the Gyre pumps.

What I like

Something else likeable about this pump is that you can block one of the sides and have one pump to easily fit in any part of the tank. It also has very strong pads which attach very well to the wavemaker. It also comes with a lengthy extension cord so you have it adequate. Despite its small size, this Gyre pump can move some serious amount of water. 

The favorable design about this wavemaker is that its magnets are enclosed in rubber. It not only prevents the glass from breaking but also eliminating unwanted vibrations and sounds. It also comes with 5 controllable modes settings which ensure you are in full control of the wave motion and flow rates in your fish tank. 

I like how it’s very easy to clean as quiet as it could be. As compared to various Gyre pumps, this 330 series is very efficient, silent and provides all flow rates and easy to set up. It is very easy to set up the two pumps going and has a maximum flow rate of 2350 gallons per hour. It is also perfect for acrylic aquariums of about ½ inch thickness.

What I don’t like

Though this wavemaker is all aces, it is quite hard to maintain. It could prove costly.

  • Unique linear flow
  • Controllable design
  • Very smooth and silent
  • High maintenance cost

Super Aquatic JVP 102 A pump is from the SunSun manufacturers. It has an articulating ball joint that is capable of rotating at a 360° angle. This allows water flow to those unreachable areas. Its suction cups are powerful enough to stick to the powerhead over any glass or acrylic material. The pump’s shaft is ceramic constructed allowing it to reach a flow rate of 1300 gallons per hour. 

It is stronger and more durable than traditional plastic. It is connected to the power source through an extension cord. It is most suited for a 60-gallon fish tank. Its power usage is 12 watts and runs on 120 volts. It uses a magnetic motor so grease and oil are avoided. It is not compatible with a timer or controller so it is not accompanied with it. It is very powerful and easy to set up.

What I like

Its shaft is way stronger than the traditional plastic. It produces absolutely no noise making it a great pump. Cleaning it is also very easy. I just turned it on while pouring warm water on it. I then unplugged it and cleaned the pump and fan. Besides that, it is suitable for both salty and fresh water. With its tiny size and its powerful pumping rate of 1300 GPH, this pump is very efficient. It is easy to adjust the direction of flow. 

It has a powerful suction cup which firmly holds the circulation pump through both glass and acrylic. I love that it is energy conserving. It is rated 120 volts and uses only 12 watts of power hence saving you a lot of electricity rates. This wavemaker can also be used as a mixer in a mixing tank which holds not more than ten gallons. It helps maintain the cleanliness of your aquarium.

What I don’t like

A major turnoff for this wavemaker is that it isn’t compatible with a timer or controller. This is basically because it mentions that turning it in and off could burn out the motor.

  • 360° articulation
  • Minimum vibrations
  • Oil and grease-free motor
  • No use with a timer or controller

The SunSun JVP is a dynamic wavemaker pump. It is fully submersible. It has a 360° rotation ball joint helping to fix dead spots and feed your fish well. It comes with a manual which shows you where all parts should be placed. It is very reliable for efficient oxygenation of your fish in the aquarium. It offers a flow rate of 528GPH and runs on 120 volts and 3A.

It also helps clear trash that may be stuck down the fish tank. It is completely silent, affordable and improves water flow. It doesn’t cause any side impacts on the aquarium animals. The extension cord is also submerged. It is convenient for 30-gallon tanks. It comes with everything needed for use. It could also be used in salty water.

What I like

This wavemaker has a lot of exciting features. It has a 360° rotation at its ball joints. This helps in very many ways. First, the dead spots become less worrying. Oxygen will be supplied throughout the fish tank.  All the trash that could be on the surface of the fish tank will be raised and easy to filter out. 

Its power rating is also striking. With just 110 volts, it provides a flow rate of 528 gallons per hour. A stunning aspect of the JVP 110 is that it produces ocean-like wave movement facilitated with its 360 degrees articulation.

What I don’t like

These pumps work well for a short while before they wear out. The suction cups also becomes less grippy.

  • It is quiet
  • 360° rotation capability
  • Fast wear-out

These wave pumps mark a new generation of Aquarium circulation pumps. They are the latest controllable water pumps powered by a Direct Current (DC). They provide the most recently enhanced flow technology, efficiency and performance. This DC powered pumps have a lot of advantages over the normal Alternating Current (AC) pumps. With its speed flow technology, you easily control the circulation rates of water in the aquarium. 

Unlike AC powered pumps, they consume less heat. They have amazing filters, sums and enclosed loop systems granting the owner with its full control. It has 6 different controllable speed settings accompanied by a green flashing LED. It features a 10-minute feed button. When turned on, the pump slowly turns down and reactivates immediately 10 minutes elapses.

You could exit the feed mode by repressing it. The pumps have a fast acceleration. The pump is joined with the controller with a 3 conductor waterproof cord which is detachable. It has a cone which changes the pump’s orientation in intervals of 90°. It also has an integrated memory in case of a power cut. It produces a flow rate of up to 4500GPH.

What I like

Besides that, they also produce less heat. I like the acceleration of this pump. From a slow start, t can get to the highest speed in just 10 seconds. Having an integrated memory is also a great deal. With this feature, the wave pump has the ability to recall the last speed setting in case there’s a power run out. It will go back to that speed when the power is back. It also has a convenient feed button. It is easy to initiate when feeding the fish and also easy to exit. It is suitable for both marine and freshwater.

What I don’t like

This product is pretty much outstanding, the only thing I could notice was that it didn’t have a foam cover.

  • Efficient DC power
  • Integrated memory
  • Covenant feed.
  • Lacks a foam cover

This circulation powerhead pump is a product from the SunSun manufacturers. It has a 360° ball rotation. This allows it to generate enough waves for water movement. It also helps in avoiding dead spots. It is suitable for both marine and freshwater. It comes in a pack with two pumps. It 360° rotation improves the oxygenation of the aquarium. 

It is very affordable and easy to set up. It is also a major boost to water flow.  It is suited for 30-gallon tanks. It could aid in cleaning your fish tank. It is also utterly quiet and does not produce any annoying noises. 

What I like

I loved that this circulation pump is fully submersible. It doesn’t cause any electric shock hazard to the fish. It rotates at 360 degrees hence letting me easily adjust the position of the powerhead and enhance circulation throughout the aquarium. 

With its flow rate of 536GPH and rotatable powerhead, this pump could be used to clean the aquarium by flushing out dirt. This pump is also ideal for freshwater and salty water. Its suction cup fixation allows it to be placed anywhere. Another merit is that it produces no noise. It has a smooth water flow is very quiet.

What I don’t like

This wavemaker could easily fail when using two pumps per circulation.

  • Clears all dead spots
  • 360° articulation
  • Has no allergies
  • Could fail easily when using two pumps.

Voyager 3 is the supreme pump for aquariums. It suits in marine aquariums, freshwater aquariums and reef aquariums. It is a high performing stream pump picking up features from the earlier models and upgrading them. The flow rates of this pump range between 2800 gallons per hour to 4000 gallons per hour. 

This product comes with an instruction set showing how to properly install the impeller and how its various adjustments go. The Sicce Voyager 3 allows for adjustable flow features. It has a 6 feet long power cord. It produces a lot of flow and is extremely quiet. It has a powerful magnet to easily attach it to the glass wall. Uses less power and its pumping is steady.

What I like

Besides that, it has narrow grooves to prevent it from sucking fish in. It is also made from good quality material. Another thing that makes me like its 360° magnet orientation. Its magnet easily changes its position to match the preferred flow of water. It also has a 6 feet cord. Short power cords are usually a pain in the neck. Having a long cord makes the setting up much decent. Another awesome feature is its capability to move a lot of water with its small size and that it makes no noise.

What I don’t like

The fact that it can’t be used with Hydro Koralia is a major dissatisfaction. Plus, it produces a lot of noise once it gets worn out.

  • Quiet on startups.
  • Strong rotatable magnet.
  • Adjustable flow features.
  • Can't be used with Hydro Koralia.

Buying Guide

Making your aquarium water wavy is crucial. It comes with its benefits for the fish and aquatic plants if you have them in your aquarium. If you need to buy an aquarium wave maker we got you on that. Let’s see the factors you should look into before purchasing an aquarium wave maker.


You need to have even waves. That means that not even a single inch of the aquarium water should be left not wavy.  To ensure that the placement of the wave maker is perfect, you can choose a wave maker with small double powerheads. With a single large powerhead, you will place it at only a single point. For two powerheads you can place them at different points to increase the water movement in all directions.


Can I adjust the water flow rate of the wave maker? Having a wave maker in which you can control its water flow rate is very important. You will not always need a high level of water movement. There is some time that your fish will just need low-level waves. Keep your fish comfortable by choosing a wave maker with an adjustable flow rate. 


How will I mount the wave maker? There are hundreds of wave maker models in the market today. They will even confuse you on which to pick. If you want the best choose the one with a mount style that favors you. First, you need to determine the thickness of the point of your aquarium where you will mount the wave maker. With that, you will be in a position of selecting a wave maker with a mount style that will fit your aquarium.


A good wave maker should serve you for a long time. To determine whether the wave maker is durable or not, look at the material used to make the product.  The high-quality material ensures the durability that low-quality materials. Manufacturers always indicate the material they use to make the aquarium wave maker. Getting a durable wave maker at an expensive price is better than having a cheap low-quality one. 

Sound level

Noisy wave maker are annoying. I know everyone can agree with me. I mean, we are trying to get a good environment for the fish and a perfect view for ourselves. Therefore, having a noisy wave maker makes it even worse. You will find that some wave makers in the market have motors that produce high sound levels. Always stay away from such wave maker no matter how cheap they are. Look for a wave maker that has smooth and quiet operation characteristics. You can opt for models that allow submerging of the pump in aquarium water.

Aquarium size

Always remember that different wave maker models have vast powerhead sizes. Therefore, the different powerhead sizes make a variation in which the wave maker suits a particular aquarium size. A bigger aquarium will require a bigger powerhead size wave maker. This is because bigger aquariums will need a higher flow rate which only a big powerhead can offer. In case your aquarium is a small size, then go for a small powerhead wave maker.

Benefits of an Aquarium Wave Maker

Having a wave maker for your aquarium is not wasting cash. It comes with its benefits, some of which will surpass your expectations.

Gets rid of dead spots

If you are an aquarium owner you may be familiar to the term dead spot. There are points in your aquarium which experience no water movement. You can refer to such points as dead spots. Having an aquarium wave maker will provide even waves in your aquarium. That makes the circulation of fresh oxygen all over the aquarium perfect. Your fish will have fresh oxygen regardless of the point they are at.

Promotes healthy growth of aquatic plants and aquatic animals

Some aquarium owners have aquatic plants or animals or both in their aquarium. Trust me, they need healthy growth as any other aquatic plant or creature in the oceans. A wavemaker is one of the things that will enhance their growth. Once you add food to the aquarium, if the wavemaker is absent, all nutrients may not reach the fish or plants. In its presence, it will distribute the nutrients all over where the fish can reach. In that way, they will get all the nutrients that make them thrive. 

Creates a perfect environment

Fish are used to wavy environments like the ocean. Now imagine if you create almost a similar environment to what they are used to. Trust me, they will feel happy and comfortable. Do you now that fish can get stress? Yes, this will happen if you don’t give them an environment that they can adapt quickly. A wave maker gives them a perfect environment. 

Gives a pleasant view

Imagine having an aquarium view that you can enjoy watching over and over. Perfect, right? An aquarium wave maker helps you achieve this. Seeing a wavy aquarium with fish and aquatic plants feels amazing. It’s like you are on a real vacation. It can be a pleasant thing to decorate your house and make it lively. 

Prevents from waste accumulating in your aquarium

Aquariums accumulate dirt as time goes by. This condition will not be perfect for your fish and aquarium plants. An aquarium wave maker helps distribute the dirt which is better than accumulating at one point. If the waste accumulates at one point, it creates an unpleasant to look at the view. 

Having an aquarium wave maker is beneficial to both the aquarium owner, fish, and aquatic plants. If you have an aquarium, you should consider getting the best.

How Does An Aquarium Wave Maker Work?

As the name indicates, the main duty of an aquarium wave maker is to create waves in the aquarium water. Are you wondering how it does that? Well, it is all possible through the application of mechanical force. Certain components make an aquarium wave maker work. For example, it is not functional without a powerhead. 

A powerhead is the core of any wave maker. Some quality aquarium wave makers come featuring an adjustable flow rate. That is important since different fish types require varying wave levels. Now that you know that, are you ready to know how an aquarium wave maker operates? Well let’s get to it

For newbies in using a wave maker, you may be wondering how it works to the point of creating a wave. It is just an easy practical process that anyone can understand. First, you have to understand the basics of waves and how they come to be. Does applying basic force cause waves in the water? You should be asking yourself such a question to get how the wave maker operates. 

Well, an aquarium wave maker involves two points. The first point is where the water comes in and the second is the water outlet. As the water gets in from the first to the second point, the wave maker generates air moving in the opposite direction of the water flow. 

The air and water moving in different directions lead to the creation of contradictory forces. Remember that the volume of water is higher than the pressure here. The force creates acts against the air and the water which leads to the creation of friction in the water. This act brings about a wave in water. Now, an aquarium wave maker uses electrical power to make repetitive water flow. That makes the process repeat itself thus making continuous waves.

How to Install an Aquarium Wave Maker

Installation of an aquarium wave maker is an easy task. Some models will have a different setup process. However, there is a general procedure that can work for most of the wave makers. If you need to install your wave maker, follow the following easy steps.

  • Make sure that your aquarium is clean: For perfect setting up of the wave maker, cleaning the aquarium is very important. An aquarium accumulates waste and dirt which can make the suction attachment or magnet fail to provide a strong grip. Therefore, clean the dirt before installation. Always fix the wave maker pump beneath the water to prevent vibrations and the production of sound. After cleaning the aquarium you are set for the next step
  • Take the installation cable ready for use
  • Connect the suction cups (other people may call the ‘magnets’). You can achieve that by pressing a rotatable axis to face the aquarium wave makers back area
  • Then place the pump deeply beneath the water surface and connect it to the suction cups
  • Be sure to clean the aquarium glass areas. For wave makers featuring suction cups, it is even easier to do this step. Just place the suction cups against the glass part of the aquarium for it to stay still.
  • Then the pump requires power. Therefore plug in the wave maker to the power source

Wave maker with magnets are easier to set up since you just put the magnet against the aquarium glass and the wave maker stays still. After installing the wave maker, always remember that it needs maintenance. Do you know why? Well, the best performance of any gadget does not come easily. You need to put effort and take care of it. The same case applies to an aquarium wave maker. Better waves don’t come by just installing the wave maker and leaving it. 

The wave maker’s pump requires cleaning and maintenance. If you want the pump to serve you for a long period, those activities are a must-do. In case you want to remove the pump from the aquarium for cleaning, use to separate hands to remove the pump and the suction cups. Reassemble the pump and clean each component.  Clean the components smoothly to avoid breakage then assemble the back. Then repeat the above installation procedure to reset up the wave maker again. In case you are a beginner, I hope you know understand the concept of installing an aquarium wave maker. No need of stressing again.


Q: What size and number of wave makers do I require?

A: First determine the size of your aquarium to know the size you need. For example, an 80-gallon aquarium will need a wave maker with a 1600 GPH low rate. Also if you go for a single wave maker, choose the one with two powerheads for perfect positioning and even waves distribution.

Q: Are wave makers safe for the fish?

A: They are 99.9% safe for your fish. An aquarium wave maker will benefit your fish more. Starting with helping in the circulation of oxygen in the aquarium to the distribution of nutrients. This shows that a wave maker causes no harm to your fish or any other aquatic animal.

Q: How many times should I clean my wave maker?

A: Just like the aquarium itself, an aquarium wave maker requires cleaning. If you think you just install and leave it, you are very wrong. Cleaning maximizes the wave maker’s durability. You can opt to clean it after a month or a couple of months depending on the dirt that your aquarium accumulates.

Q: Are wave makers noisy?

A: Whether an aquarium wave maker will be noisy or not, depends on the models. Some cheap and low-quality models produce a lot of sounds. It’s better if you choose an expensive but quite wave maker. Wave makers that allow submerging of their pump into the aquarium water runs quietly.

Final Words

Are you an aquarium owner? Do you have an aquarium wave maker? If you have one, pat yourself on the back. If you don’t have one, I must tell you that you and your fish are missing out on an incredible experience. 

From creating a pleasant view for you and a conducive environment for the fish is just a perfect reason why you should get the best aquarium wave maker. This gadget will do magic in creating waves and providing an ocean-like environment. Just follow our buying guide to get the best aquarium wave maker and let’s get amazed together in this interesting aquarium world.

Leave a Comment